The Most Commonly Asked Questions About Asphalt
Asphalt is a popular paving material for driveways and parking lots. It is durable, weather-resistant, and relatively easy to maintain. It comes in a variety of colors. However, asphalt can also be confusing for homeowners who are not familiar with it. Affordable Sealing & Striping, Inc will answer some of the most commonly asked questions about asphalt paving. We will cover everything from installation to repair to maintenance!
What is Asphalt?
Asphalt is a paving material of gravel, sand, and bitumen. Bitumen is a sticky, black substance that helps bind the other materials together. This mix is then compacted to create a smooth surface. Asphalt can be used for both residential and commercial applications.
How Long Does Asphalt Last?
Asphalt pavement can last many years when properly installed and maintained. However, the lifespan of your asphalt will depend on factors such as the climate, traffic volume, and whether or not it was properly sealed. Generally, your asphalt can last anywhere from 15 to 30 years.
How To Know If My Asphalt Needs to be Replaced?
If you notice large cracks or holes in your asphalt, it is time to replace them. It would be best to ask an asphalt paving contractor, to inspect your asphalt surface every few years for possible damage or wear and tear.
How Much It Costs to Replace an Asphalt Pavement?
The cost of replacing your asphalt will depend on the size of the area that needs to be repaired and the type of materials used. Contact an asphalt paving contractor to get the estimate of the work.
What Are Some Tips For Maintaining My Asphalt?
To help extend the lifespan of your asphalt, be sure to seal it every few years. If you park in the same spot, it can cause the surface to crack. In addition, be sure to clear away any debris or leaves from your pavement to prevent staining.
What Are Some Common Problems With Asphalt?
The most common problem with asphalt is cracking. It can be caused by everything from weather damage to tree roots growing underneath the surface. If you notice any cracks in your asphalt, it is essential to have them repaired as soon as possible to prevent further damage. You should also avoid driving over potholes, which can cause your tires to blow out.
Hopefully, these frequently asked questions about asphalt have been helpful! If you have more questions about your asphalt surface, contact an asphalt paving contractor for help.
Ending Note
Asphalt is frequently used for paving roads, driveways, and parking lots. It is durable, weather-resistant, and relatively easy to maintain. It comes in a variety of colors. However, asphalt can also be confusing for homeowners who are not familiar with it. That’s where we come in. Affordable Sealing & Striping, Inc provides expert installation and maintenance of asphalt surfaces in Cheyenne, WY.
We’ll answer your queries and give you a free estimate so you can make the best decision for your home or business. Don’t know much about asphalt? No problem! Our asphalt paving contractors will walk you through the process, so you feel confident about your decision. Contact us today to get started!
Installing concrete signals a new beginning. Whether it’s a fresh start for your business or a new home, concrete is an essential part of the process. But even though it’s such an important material, plenty of people still don’t know how to install it properly.
If you’re in the process of installing concrete, there are a few mistakes that you’ll want to avoid. Here are the top 7 mistakes people make when installing concrete:
1. Not Preparing the Base
The base is one of the most critical parts of any concrete installation. Without a good base, the concrete will eventually crack and crumble. Make sure to excavate the area where you’ll be pouring the concrete and compact the soil before you pour.
2. Not Using the Right Mix
When it comes to the right mix of concrete, there’s no one size fits all approach. The mixture you use will depend on the project you’re working on. Make sure to consult with a professional or do your research to determine which mix is right for your project.
3. Not Adding Reinforcement
Reinforcing your concrete with a steel rebar or wire mesh will help prevent cracking and improve the overall strength of the finished product. People often make the mistake of not reinforcing their concrete, assuming it will be strong enough on its own.
4. Poor Compaction
This tip is crucial to saving your concrete from cracking or settling unevenly. When compacting concrete, make sure to use a tamper or vibrating plate compactor to get the job done right. You can also rent a compactor from most home improvement stores.
5. Incorrect Curing
After you’ve poured your concrete, it’s important to allow it to cure properly. This helps the concrete reach its full strength and prevents cracking. The best way to cure concrete is to keep it moist during the curing process. You can cover it with plastic sheeting or spray it with water. Be sure to cure your concrete for at least seven days before removing the plastic or watering it down.
6. Poor Drainage
Drainage helps the concrete to dry evenly and prevents cracking. If your concrete doesn’t have proper drainage, it can cause the surface to break as the water evaporates. Be sure to use a perforated pipe or drains in your concrete to help with drainage.
7. Failing to Seal Properly
A sealer is used to seal the concrete once it has been appropriately cured. This helps to protect the concrete from staining and makes it easier to clean. Be sure to follow the manufacturer’s instructions on adequately sealing your concrete or avail of professional help if you would rather avoid the DIY approach.
While these are just a few tips to help you avoid common mistakes when pouring concrete, following these guidelines will help ensure that your next concrete project is successful.
If you are looking for professional help for your concrete project in Estes Park, CO, contact Affordable Sealing & Striping, Inc, today. We offer a wide range of concrete services, including concrete replacement, concrete crack sealing, and more.
Call us today to learn more about our services or to get a free estimate.
Are you spending a fortune rehabilitating your asphalt driveways, parking lots, or any other blacktop surfaces? Well, you are not the only one. Asphalt is a popular pick for many homeowners and commercial property owners because of its durability and relatively low cost.
When it comes to asphalt, one of the main concerns people have is its vulnerability to staining, fading, and cracking. Asphalt is susceptible to various external factors damaging its surface, from the sun’s UV rays to oil spills and gas leaks.
Luckily, asphalt surface protection treatments can help extend the life of your driveway and enhance its beauty.
Chip Seals:
Chip sealing, or seal coating, is a standard bituminous pavement preservation procedure. It seals fine cracks in the pavement surface and prevents water infiltration in the pavement structure below. Chip seals also improve skid resistance and friction.
The procedure involves applying a bituminous binder to the pavement surface followed by a layer of aggregate. A heavy roller then compacts the binder/aggregate mixture. Seal coating protects an asphalt driveway from fuel spillages, oxidization, and sunlight.
Slurry Seals:
Slurry seals are a mixture of mineral filler, asphalt emulsion, and fine aggregate. They are used to:
- Fill minor cracks and voids
- Level uneven surfaces
- Improve skid resistance
- Extend the life of an asphalt pavement.
The application process involves applying a slurry layer onto the pavement surface. Squeegees or spreader boxes can also be used to apply the slurry.
Slurry seals do not provide any structural benefit to the pavement. But they are a very cost-effective treatment for preserving the existing pavement surface, enhancing appearance, and restoring or enhancing friction.
Micro Surfacing:
Micro-surfacing is similar to a slurry seal; however, it utilizes a polymer-modified emulsion instead of an asphalt emulsion. The addition of polymers to the slurry improves its ability to adhere to the pavement surface, resist cracking, and provide a long-lasting wear surface.
Micro-surfacing can be applied in a thicker layer than slurry seals, so it is often used to repair moderate to severe damage to the pavement surface. It also improves skid resistance.
Scrub Seal:
Scrub sealing is a three-step process that begins with applying a pre-mix aggregate to an existing asphalt pavement surface. A sweeper machine then clears the surface of any loose material. The final step is to apply a polymer-modified emulsion over the aggregate.
Scrub seal is a superior alternative for severely cracked asphalt pavement with a stable structure.
Fog Seals:
A fog seal is a liquid asphalt emulsion (a thin liquid oil) application to an existing pavement surface. A fog seal gets its name from the spray method, also known as “fogging.”
In fog seal jobs, asphalt emulsions include:
- Globules of paving asphalt
- Water
- An “emulsifying agent” or surfactant
- Occasionally a “rejuvenator.”
Soap is a common form of surfactant. The surfactant’s job is to keep the liquid asphalt and water from separating. The rejuvenator’s function is to replenish some pavement binders lost to oxidation and weathering.
Conclusion:
Affordable Sealing & Striping, Inc is a full-service asphalt maintenance contractor in Longmont. From asphalt sealcoating to hot pour crack filling and more, we have the experience and expertise to get the job done right.
There are many advantages to using recycled asphalt for your driveway. It’s a more sustainable option and can also be cheaper and easier to install than traditional paving materials.
This blog post will review some of the top sources of recycled asphalt and how they can help you create a greener home.
We’re sure this information will help you decide about your driveway upgrade project!
Source 1: RAP
If you’ve never heard of it, Reclaimed Asphalt Pavement (RAP) is simply asphalt that has been removed from an existing roadway.
This material is crushed and screened to create a new paving material. RAP can be used as a base, binder, or surface course in new pavement construction. We recommend it over concrete because it is a more sustainable option that can help reduce your carbon footprint.
Save your planet and neighborhood from unwanted landfills, expensive construction, and other environmental impacts by using RAP for your driveway!
Source 2: Tire Rubber
Tire rubber is a crumb rubber modifier (CRM) made from waste tires that can be used as an additive in hot mix asphalt (HMA). The use of tire rubber in HMA can improve pavement performance, including resistance to rutting and cracking.
It also helps to reduce tire-pavement noise and can make pavements more skid-resistant. However, this type of material requires careful and precise mixing, as it significantly impacts the asphalt’s properties.
Tire rubber can be an excellent way to reduce your pavement’s environmental impacts by using recycled materials!
Source 3: Asphalt Roofing Shingles
While they share the same namesake, asphalt roofing shingles are not the same material as what’s used on your driveway. Asphalt roofing shingles are made with fiberglass or organic mat, with asphalt making up very little of the shingle’s composition.
Asphalt roofing shingles are one of the most commonly recycled construction materials. They can be a great way to give your driveway some extra protection against the elements!
Like CRM, however, this type of material also requires careful recycling and processing to avoid harming the asphalt’s quality.
Source 4: Steel and Blast Furnace Slags
While blast furnace slag (BFS) is a by-product of the steelmaking industry, you can use it in asphalt to improve its durability! BFS is added to asphalt to improve its resistance to cracking and rutting, two common issues plaguing driveways.
Steel slag can also provide a sustainable alternative to traditional gravel for driveways. When it’s used as an aggregate in asphalt, steel slag can improve the pavement’s ability to resist water damage and degradation.
However, it’s essential to ensure that the steel slag you use comes from a reputable source. Some steel slags can contain high levels of harmful contaminants, so it’s crucial to do your research before using this material for your driveway.
Conclusion
If you’re interested in using recycled materials for your driveway in Greeley, CO, reach out to a reliable paving contractor like Affordable Sealing & Striping, Inc.
We have years of experience working with asphalt & concrete installation & repairs so, you can rest assured your pavement is in good hands. We’d be happy to help you find the perfect solution for your home.
Don’t forget to send in a request for a free quote on your desired service!
Are you wondering what type of signage is best for your business’s parking lot? You’re not alone! There are various types of parking lot signage, and it can be tough to decide which one is right for your business.
In this blog post, Affordable Sealing & Striping, Inc will look at the different types of parking lot signage and discuss which one might be best for your business in Loveland, CO. If you’re ready to learn more about parking lot signage,
Fire Lane Signs:
If you have a business located in a fire lane, you must have a sign. These signs are usually brightly colored and easy to see. However, they can be expensive, and they may not be necessary if your business is located in a low-traffic area.
Customer Parking Signs:
If you have a business that provides customer parking, you’ll need to have signs that indicate where the parking is located. These signs are usually fairly standard and easy to find. However, they can be expensive, and they may not be necessary if your business is located in a high-traffic area.
Directional Signs:
Directional signs are usually used in conjunction with customer parking signs. They help customers find your business, and they can be very helpful if your business is located in a large complex or a difficult-to-find location. However, they can be expensive, and they may not be necessary if your business is located in a high-traffic area.
Pedestrian Crossing Signs:
Pedestrian crossing signs are usually placed near busy intersections or areas where pedestrians are likely to be crossing the street. They help pedestrians stay safe, and they can also help reduce traffic congestion. However, they can be expensive, and they may not be necessary if your business is located in a low-traffic area.
Speed Limit Signs:
Speed limit signs are usually placed in areas with a lot of traffic or where the speed limit is particularly low. They help drivers stay safe, and they can also help reduce accidents. However, they can be expensive, and they may not be necessary if your business is located in a low-traffic area.
Handicap Signs:
Handicap signs are required by law in many places, and they help people with disabilities stay safe. They can be expensive, but they may be worth the investment if your business is located in an area with many foot traffic.
No Parking Signs:
No parking signs are usually placed in areas with a lot of foot traffic or risk of accidents. They help keep people safe, and they can also help reduce the amount of congestion in an area. However, they can be expensive, and they may not be necessary if your business is located in a low-traffic area.
Building Signs:
A building sign is a great way to make your business stand out. You can use a building sign for advertising your business or identify your business location. Building signs can be expensive, but they are a worthwhile investment if you want your business to stand out from the competition.
So, what’s the best type of signage for your business? The answer is it depends on your specific needs. Hopefully, you’re feeling more confident about finding the perfect parking lot signage for your business.
If you want to learn more or get a free estimate for new signage for your business, check out the Affordable Sealing & Striping, Inc. Contact us today – we would love to help!
Reasons Why Corrective Asphalt Pavement Patches Fail
Asphalt is a paving material used to pave roads and highways. Aggregate, asphalt cement, and water make up this material. When first installed, asphalt pavement is smooth and even. However, over time, it can develop cracks and potholes. It happens for several reasons, including weathering of the asphalt, traffic loads, or other environmental factors.
These damages can lead to further problems such as surface raveling or alligator cracking. Patches are usually applied to asphalt surfaces to fix these damages. However, these patches often fail due to a variety of reasons.
This blog post discussed the four most common reasons for the failure of asphalt patches.
Poor Material Quality:
The quality of the materials used for the patch is one of the most important factors determining its success. If the materials are compromised, the patch will not be able to adhere to the surface correctly and is more likely to fail.
The materials that qualify as being up to par are those that are of similar composition to the existing asphalt. It means that they need to have the same properties in terms of durability and flexibility.
The commonly used materials are
- Hot mix asphalt
- Asphalt emulsion mixes
- Cold patch mixes
- Proprietary patching materials
Incorrect Installation:
Several asphalt patching techniques are used; a paving contractor can tell you which one best suits your needs, but the method must be executed correctly for the patch to be successful.
Asphalt patching techniques include:
- Throw-and-roll
- Full-depth
- Spray injection method
- Semi-permanent patches
Of these, the throw-and-roll patching method is the most likely to fail. This method does not create a bond between the patch and the surface. The patch is placed on the surface and then rolled over with a heavy roller.
The full-depth patching method is the most permanent and least likely to fail. This method involves excavating the entire pothole, adding new base material, and then compacting the new material.
No Compaction:
The compaction process involves removing any air pockets from the new material. It can be done with a hand tamper, vibrating plate compactor, or roller. The method may take several passes to ensure that the entire area is adequately compacted but once correctly done, it can make a difference of a good 7 to 12 years.
Without adequate compaction, the asphalt surface will settle and fail. It may cause:
- Reduced stiffness
- Rutting and raveling
- Moisture susceptibility
Lack of Adequate Drainage:
Another common reason for asphalt failure is inadequate drainage. When water seeps into cracks and freezes, it expands and puts pressure on the asphalt. It can cause cracking, potholes, and other types of damage.
An appropriate way to include drainage in your asphalt pavement is to use a drainage layer that will allow water to flow away from the surface. It can be done by installing a perforated pipe under the asphalt or using a French drain.
Bottom Line:
Keeping your asphalt pavement in good condition is vital to avoid costly repairs. Affordable Sealing & Striping, Inc, serving Fort Collins, offers high-quality asphalt patching services keeping in mind all the essential details to ensure a long-lasting repair.
Get a free estimate today for all your asphalt needs!
Asphalt is a popular material for paving driveways and sidewalks because it is durable, weather-resistant, and relatively inexpensive. However, working with asphalt can be dangerous if you’re not properly equipped or trained.
In this article, Affordable Sealing & Striping, Inc will discuss the hazards of working with asphalt and how to avoid them. We’ll also provide tips for repairing minor damage to your driveway or sidewalk. Thanks for reading!
Dangers of Working with Asphalt:
Working with asphalt can be dangerous, as the chemicals used in this material are harsh on your skin and eyes. Also, the material is very hot when first laid down. Follow the manufacturer’s instructions carefully and always wear gloves and other protective clothing when working with asphalt.
Following are possible dangers of working with asphalt:
1. It Can Cause Burns:
Asphalt can cause severe burns. The chemicals in asphalt are petroleum-based, which makes it susceptible to catching fire and causing serious injuries. If you accidentally touch hot asphalt, remove any clothing that touches it and run cold water over the wounded area for at least 20 minutes.
2. It is Flammable:
Asphalt is a flammable material, so it’s important to take precautions when working with it. Be sure to keep asphalt away from any open flames or heat sources. If you’re using a torch to melt the asphalt, be sure to have a fire extinguisher on hand in case of an accident.
3. It Contains Toxic Fumes:
The greatest way to avoid inhaling fumes is by working in a well-ventilated area, but wear your respirator if that’s not possible! The toxic fumes from asphalt can cause headaches, dizziness, and nausea. These feelings of lightheadedness are a clear sign that you should take some time for yourself. Get outside and enjoy the fresh air!
4. Inhalation is Dangerous:
Another hazard of working with asphalt is inhaling the fumes. Asphalt fumes can irritate your lungs and throat and cause difficulty breathing. It’s important to wear a respirator when working with asphalt to avoid inhaling the fumes.
5. It can Cause Skin Irritation:
Asphalt can also cause skin irritation. If you contact asphalt, wash the area immediately with soap and water. If you react, such as a rash, see a doctor.
Safety Tips for Working with Asphalt:
Now that we’ve discussed the dangers of working with asphalt, let’s go over some tips for staying safe.
1. Wear Proper Clothing:
When working with asphalt, make sure to wear long-sleeved shirts and pants. It protects your skin from contact at all costs!
2. Work in a Well-Ventilated Area:
As we mentioned before, inhaling the fumes from asphalt can be dangerous. To avoid this, make sure you’re working in an area with good ventilation. If possible, work outdoors.
3. Wear a Respirator:
If you can’t work in a well-ventilated area, or if you’ll be working with a large amount of asphalt, make sure to wear a respirator. A respirator will help protect your lungs from harmful fumes.
4. Use Caution when Working around Traffic:
If you’re working on a driveway or sidewalk, avoid blocking traffic. And if you’re working on a road, always wear reflective clothing and follow all traffic laws.
If you spill any asphalt, make sure to clean it up immediately. Asphalt can be slippery and dangerous, so removing any potential hazards is important.
If you’re working with asphalt, make sure you take the necessary precautions to stay safe. Here at Affordable Sealing & Striping, we want to keep our customers in Casper, WY, safe and happy, so please don’t hesitate to contact us a call for a free estimate.
We look forward to hearing from you!
Asphalt is a popular material for paving driveways and sidewalks because it is durable, weather-resistant, and relatively inexpensive. However, working with asphalt can be dangerous if you’re not properly equipped or trained.
In this article, Affordable Sealing & Striping, Inc will discuss the hazards of working with asphalt and how to avoid them. We’ll also provide tips for repairing minor damage to your driveway or sidewalk. Thanks for reading!
Dangers of Working with Asphalt:
Working with asphalt can be dangerous, as the chemicals used in this material are harsh on your skin and eyes. Also, the material is very hot when first laid down. Follow the manufacturer’s instructions carefully and always wear gloves and other protective clothing when working with asphalt.
Following are possible dangers of working with asphalt:
1. It Can Cause Burns:
Asphalt can cause severe burns. The chemicals in asphalt are petroleum-based, which makes it susceptible to catching fire and causing serious injuries. If you accidentally touch hot asphalt, remove any clothing that touches it and run cold water over the wounded area for at least 20 minutes.
2. It is Flammable:
Asphalt is a flammable material, so it’s important to take precautions when working with it. Be sure to keep asphalt away from any open flames or heat sources. If you’re using a torch to melt the asphalt, be sure to have a fire extinguisher on hand in case of an accident.
3. It Contains Toxic Fumes:
The greatest way to avoid inhaling fumes is by working in a well-ventilated area, but wear your respirator if that’s not possible! The toxic fumes from asphalt can cause headaches, dizziness, and nausea. These feelings of lightheadedness are a clear sign that you should take some time for yourself. Get outside and enjoy the fresh air!
4. Inhalation is Dangerous:
Another hazard of working with asphalt is inhaling the fumes. Asphalt fumes can irritate your lungs and throat and cause difficulty breathing. It’s important to wear a respirator when working with asphalt to avoid inhaling the fumes.
5. It can Cause Skin Irritation:
Asphalt can also cause skin irritation. If you contact asphalt, wash the area immediately with soap and water. If you react, such as a rash, see a doctor.
Safety Tips for Working with Asphalt:
Now that we’ve discussed the dangers of working with asphalt, let’s go over some tips for staying safe.
1. Wear Proper Clothing:
When working with asphalt, make sure to wear long-sleeved shirts and pants. It protects your skin from contact at all costs!
2. Work in a Well-Ventilated Area:
As we mentioned before, inhaling the fumes from asphalt can be dangerous. To avoid this, make sure you’re working in an area with good ventilation. If possible, work outdoors.
3. Wear a Respirator:
If you can’t work in a well-ventilated area, or if you’ll be working with a large amount of asphalt, make sure to wear a respirator. A respirator will help protect your lungs from harmful fumes.
4. Use Caution when Working around Traffic:
If you’re working on a driveway or sidewalk, avoid blocking traffic. And if you’re working on a road, always wear reflective clothing and follow all traffic laws.
If you spill any asphalt, make sure to clean it up immediately. Asphalt can be slippery and dangerous, so removing any potential hazards is important.
If you’re working with asphalt, make sure you take the necessary precautions to stay safe. Here at Affordable Sealing & Striping, we want to keep our customers in Casper, WY, safe and happy, so please don’t hesitate to contact us a call for a free estimate.
We look forward to hearing from you!
6 Signs It’s Time To Replace Your Concrete Driveway
There’s no doubt that a well-constructed and maintained driveway can add considerable value to a home. But it’s also no secret that concrete driveways age over time. The good part is that many tell-tale signs let you know when it’s time for a replacement. If you can notice these signs early, it will save you both money and hassle in the long run.
So, if you’re wondering whether or not it’s time to replace your driveway, consult a professional asphalt service provider like Affordable Sealing and Striping; this blog post will outline some of the most common warning signs below.
Deep Cracks
If you have a concrete driveway, it will crack at some point. This is particularly true if the ground underneath shifts or settles. While repairing small cracks is easy, deep cracks may signify that the entire driveway needs to be replaced.
Chipped Edges
Another common issue with concrete driveways is chipped edges. This can usually happen when vehicles run onto the sides of the driveway. It can also occur when heavy objects are dropped on the edge. While you can patch these areas, they will likely continue to chip over time. Replacing the entire driveway is a more permanent solution.
Pitted Surface
Pitting occurs when small craters form on the surface of the concrete. It is usually the result of weathering and wear and tear. Pitted concrete can be tough to clean and repair, so it’s often best to replace the driveway entirely.
Stains
Concrete driveways are susceptible to oil, grease, and other fluids staining. While you can try to clean these stains, they will often return. If your driveway is stained, it may be time for a replacement.
Crumbling Concrete
If your concrete driveway is crumbling or flaking, it’s time for a replacement. This is usually caused by poor-quality concrete or improper installation. Either way, it’s not something that can be repaired.
It’s Been Long
Concrete driveways typically last around 20-30 years. So, if your driveway is approaching this age or is already beyond it, it may be time to replace it. Even if there are no visible signs of damage, the concrete may be weakened and could start to crumble at any time.
Importance of Concrete Driveway Replacement
A concrete driveway is a significant investment, so it’s essential to take care of it. By replacing your driveway before it becomes too damaged, you can avoid paying for substantial repairs. You’ll also be able to keep your home’s curb appeal intact and prevent any accidents from happening.
If you identify any of these signs, it might be time to replace your concrete driveway. Luckily, Affordable Sealing and Striping is here to help! We can perform the entire replacement for you, from removing the old driveway to pouring new concrete in Laramie, WY. We also offer services like asphalt patching, concrete replacement, etc. Contact us today to learn more about our services and get a free quote.
Business owners are always looking for ways to be more environmentally friendly and save money. One way to do both of those things is by recycling pavement.
Asphalt can be recycled into new pavement, saving the resources needed to create new pavement and curtailing the number of pollutants released into the environment.
This blog post by Affordable Sealing & Striping, Inc. will discuss the ins and outs of recycling pavement, plus all the benefits you can expect from it.
What Is the Process of Asphalt Recycling?
Recycling asphalt is not as complicated as you might think. The process begins by removing the top layer of asphalt in the asphalt milling procedure. The top layer is removed from a street, parking lot, or driveway using asphalt milling without disturbing the underlying sub-base.
The milled-up asphalt is then taken to an asphalt plant for screening and re-sizing. The end product is recycled asphalt that you can use for new paving projects.
The “renewed” asphalt quality is much better than the original pavement in most cases. This is because asphalt recycling reclaims old aggregates and bitumen, which helps extend the life of new pavements.
What Is the Process of Concrete Recycling?
This is another relatively straightforward process. The concrete is first broken and removed, then crushed into a specific size and quality, similar to the asphalt.
Other materials like reinforcing steel and contaminants like asphalt are also removed. Once the material is clean, and of the right consistency, you can reuse it just like new concrete.
You also can use the crushed concrete as an aggregate while creating a new asphalt sub-base in paving projects.
What Are the Benefits of Pavement Recycling?
Where to start? There are many perks to using recycled asphalt and concrete, including:
- It’s environmentally friendly: By recycling materials instead of extracting and processing new ones, you reduce the amount of waste going into landfills.
- It saves money: Recycled pavement is cheaper than new material, so it can help reduce the overall cost to the contractor and the taxpayer.
- It’s durable: Recycled pavement has been shown to last just as long, if not longer, than new pavement.
- It helps conserve natural resources: Recycling the mineral particles produced by crushing asphalt and concrete reduces the need for new quarries and mines.
- It’s versatile: In the case of recycled asphalt, you can use it as a base for new pavement or as an overlay. Recycled concrete can be used as a base or sub-base or crushed and used as aggregate in other construction projects.
- It’s sustainable: When you recycle pavement, you’re extending the life of the material and reducing the environmental impact of gleaning and processing new materials.
Conclusion
There’s one more benefit to using recycled pavement: it’s a reliable service offered by Affordable Sealing & Striping, Inc. We’ve been in the business of recycling pavement in Cheyenne, WY, for several years, so you can trust us to get the job done right.
Connect with us
Archives
Quick Links
Business Hours
| Monday | 7:00AM - 7:00PM |
| Tuesday | 7:00AM - 7:00PM |
| Wednesday | 7:00AM - 7:00PM |
| Thursday | 7:00AM - 7:00PM |
| Friday | 7:00AM - 7:00PM |
| Saturday | 7:00AM - 7:00PM |
| Sunday | 7:00AM - 7:00PM |